Bacteria and Germs--Staph, Salmonella, Strep: Bacteria form on a variety of surfaces in your home. To keep bacteria under control, clean surfaces weekly with a disinfectant cleaner. Since germs are transported by hands, disinfect doorknobs, toilet flush handles, faucets and light switches often.

Mildew Removal: Mildew is caused by the growth of fungus in wet environments like bathrooms. To remove mildew, use a bleach solution (1/2 cup bleach to 1 quart water). To keep mildew from recurring, use a disinfectant cleaner. DO NOT mix Industrial Germicidal Cleaner with bleach solution.

DO NOT mix or use this product with any other chemical.  If using a cleaning cloth, mop, or sponge, rinse thoroughly between different chemical usages.

To Clean Hard Surfaces:

Shake can.

Hold can 6-8 inches from surface.

Spray until covered with white foam.

Wipe with a wet cloth or sponge.

To Disinfect Hard Surfaces:

Apply cleaner as above.

Allow foam to penetrate and remain wet for 10 minutes. No scrubbing is necessary.

Wipe off with a clean cloth or sponge. Do not rinse.

As a Mildewstat:

Pre-clean surface.

Apply mildewcide or bleach to kill mold and mildew.

Spray surfaces, wetting completely, and allow to dry.

Repeat application weekly or when mildew growth appears.

Note: A mold and mildewstat controls, inhibits, and prevents the regrowth of mold and mildew.  A mildewcide kills mildew.  Industrial Germicidal Cleaner is a mildewstat.  For all surfaces in contact with food, thoroughly rinse with clean water before reusing.  DO NOT spray into vents or on electrical components.